The entire key and lock system runs on the lock pins. The interlocking of the both results in the opening and closing of the said. If these pins lose shape or do not interlock with each other properly, the lock would not operate properly as well. It is then the replacing of the pins gets essential. The process of doing so is referred rekeying. As the name indicates the process involves recreating the pins within the lock. This process is important in creating the master keys. In this way it becomes easier to use a set of multiple keys to open one single lock. This works great in the commercial buildings like restaurants. The other form of rekeying is recreating the new pins to replace those that are not working properly. These pins differ in the shape, size and the number according to the brand. Each brand has its own requirements. The rekeying ensures that the essential features are retained and the locking system gets back to the original working and the performance. The task becomes much easier for the locksmith if the lock system comes along with the user manual that describes all the components and the design of the pins too.
The process of rekeying means that the lock must get back to the original increments that are either 0.003 inches or 0.005 inches. The locksmith has to maintain a pin kit. The most important feature of this pin kit is the different pins arranged in the descending or the ascending order of their length. The cheap locksmith Melbourne to keep an eye on the entire system so that creating the master key does not become a huge challenge. The kit comes with a series of different sized pins. The craftsman can choose the right size and the right shape as required. The same goes for the springs within the lock that help in settling the pins within the lock. Besides correcting the pins and springs, the rekeying allows to maintain and lubricate the existing systems.
The process of rekeying is not less than an art itself. It is a step by step and systematic process. At first the lock cylinder is separated from the lock. It is followed by the removal of the plug from the system. There are spaces within the chamber that are designed by the manufacturer. The pins are then adjusted within the chambers.
The process of the rekeying was actually introduced in the 19th century. It has now become a technically more advanced process as compared to the past. Most of the work is done through machines rather than through manual support and effort. Therefore, there are little chances of human error left.